Author Topic: Retropie: Microsoft X-Box 360 Pad (1118/654) not configured  (Read 4705 times)

Offline eDrinker

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
Retropie: Microsoft X-Box 360 Pad (1118/654) not configured
« on: February 16, 2017, 03:15:35 AM »
Hello,

I have wired Xbox 360 controller and all the emulators work fine but "Final Burn Alpha" and maybe some of the "MAME Emulators".

When starting a ROM it will flash yellow with "Microsoft X-Box 360 Pad (1118/654) not configured".

I tried Googling this exact phrase or around these words with no avail.

I've also read here: https://github.com/retropie/retropie-setup/wiki/Xbox-360-Controller.

I tried changing "udev" to "sld" and back again
I tried using "Xpad" and "Xboxdrv" drivers
I tried unplugging and plugging in back again again
I tried a different controller

On the wiki it has a section about "Xbox 360 Controller button configuration for retroarch and final burn alpha" but perhaps I don't understand it.

Should I ensure these these config files have the same settings as the wiki?

/home/pi/RetroPie/configs/all/retroarch.cfg
/home/pi/RetroPie/emulators/pifba/fba2x.cfg (or /opt/retropie/emulators/pifba/fba2x.cfg in some versions)

Any suggestions or anything I should test I would appreciate it.

Offline Stifu

  • Member
  • ***
  • Posts: 246
  • Karma: +5/-0
Re: Retropie: Microsoft X-Box 360 Pad (1118/654) not configured
« Reply #1 on: February 16, 2017, 11:16:46 AM »
Hi,

You know PiFBA is not libretro and therefore won't use your retroarch key configurations, right? Did you specifically set the PiFBA config?
If you did, then I believe you should bring up to the author of PiFBA.

Also, I assume you're using a Pi 1 or Zero, because if you're on a Pi 2 or 3, then you'd better use lr-fbalpha.

Offline eDrinker

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Retropie: Microsoft X-Box 360 Pad (1118/654) not configured
« Reply #2 on: February 16, 2017, 04:18:55 PM »
Sorry for wasting everyone's time.

FYI I simply updated all the packages and it works now.

Offline barbudreadmon

  • Administrator
  • *****
  • Posts: 1091
  • Karma: +59/-1
  • Helper
Re: Retropie: Microsoft X-Box 360 Pad (1118/654) not configured
« Reply #3 on: February 17, 2017, 02:53:16 AM »
When starting a ROM it will flash yellow with "Microsoft X-Box 360 Pad (1118/654) not configured".
I assume he was using libretro-fbalpha, this message seems like something retroarch is showing when it can't find the autoconfig file for a controller. Updating retroarch-joypad-autoconfig files probably solved the issue.