hi, i'm having a bit of trouble trying to set my HD CRT TV as my fullscreen monitor.
my setup is an HD CRT, a 4k monitor, and a 4k projector; i am using windows 10 x64.
FBneo 1.0 will not accept the CRT as an option no matter what i do.
all monitors appear in the drop-down menu, but if i try to select the CRT as either the horizontal or vertical games monitor, it will revert to whatever option was set before.
i can still choose between my other two monitors, so i know the option is functional.
the only method that worked was to set the CRT as a main display and disable all other monitors.
even then, the fullscreen monitor drop-down menu defaults to a blank space instead of the "generic pnp monitor (default)" option.
toggling to fullscreen still works & scales properly under this condition, so i know it is possible at least.
the tv is an Ikegami HTM-1517R (not too far from a sony BVM) outputting as 640x480p through crt-emudriver/R9 380x.
i tried outputting from either Custom Resolution Utility or straight out of a GTX970 from nvidia's drivers (all after many clean installs).
i also tested many different resolutions since the CRT can output HD signals, but the issue remained consistent throughout.
the CRT must be connected through analog, so i am outputting from a DVI-I to VGA cable -> extron 160xi interface -> 4x BNC cables (RGBS ) into the TV.
since this connection is another consistent factor throughout this troubleshooting: could using the DVI-I as an analog out cause incompatibility somehow? i do not have other analog outputs available unfortunately.