Topic: FB Alpha Enhanced R1 to R14 [v0.2.96.72]

[BisonSAS]

It works, BUT...it make the first DIPs (regions) disappear ...check the attachment =(

EDIT:  If I comment 'Service' (not the Diagnostic) then the regions appear in the DIPs (check the new attachment)

Change the DIPs 0x1a to 0x1b:

static struct BurnDIPInfo cps3DIPList[] = {
   // Defaults
   {0x1b,   0xFF, 0xFF,   0x01,   NULL         },

   // DIP 1
   {0,      0xFE, 0,   9,      "Region"      },
   {0x1b,   0x01, 0x0f, 0x00,   "XXXXXX"      },   
   {0x1b,   0x01, 0x0f, 0x01,   "JAPAN"         },
   {0x1b,   0x01, 0x0f, 0x02,   "ASIA (NCD)"   },
   {0x1b,   0x01, 0x0f, 0x03,   "EURO"         },
   {0x1b,   0x01, 0x0f, 0x04,   "USA"         },
   {0x1b,   0x01, 0x0f, 0x05,   "HISPANIC"      },
   {0x1b,   0x01, 0x0f, 0x06,   "BRAZIL"      },
   {0x1b,   0x01, 0x0f, 0x07,   "OCEANIA"      },
   {0x1b,   0x01, 0x0f, 0x08,   "KOREA"         },

   {0,      0xFE, 0,   2,      "NO CD"         },
   {0x1b,   0x01, 0x10, 0x00,   "No"         },
   {0x1b,   0x01, 0x10, 0x10,   "Yes"         },
};
STDDIPINFO(cps3);

[CaptainCPS]

  Nice! ^^ I think I just figured out why it requires this change...

   {"P1 Coin",      BIT_DIGITAL,   Cps3But2 +  8,   "p1 coin"},      // 0x00
   {"P1 Start",   BIT_DIGITAL,   Cps3But2 + 12,   "p1 start"},   // 0x01
   {"P1 Up",      BIT_DIGITAL,   Cps3But1 +  0,   "p1 up"},      // 0x02
   {"P1 Down",      BIT_DIGITAL,   Cps3But1 +  1,   "p1 down"},      // 0x03
   {"P1 Left",      BIT_DIGITAL,   Cps3But1 +  2,   "p1 left"},      // 0x04
   {"P1 Right",   BIT_DIGITAL,   Cps3But1 +  3,   "p1 right"},   // 0x05
   {"P1 Button 1",   BIT_DIGITAL,   Cps3But1 +  4,   "p1 fire 1"},   // 0x06
   {"P1 Button 2",   BIT_DIGITAL,   Cps3But1 +  5,   "p1 fire 2"},   // 0x07
   {"P1 Button 3",   BIT_DIGITAL,   Cps3But1 +  6,   "p1 fire 3"},   // 0x08
   {"P1 Button 4",   BIT_DIGITAL,   Cps3But3 +  3,   "p1 fire 4"},   // 0x09
   {"P1 Button 5",   BIT_DIGITAL,   Cps3But3 +  2,   "p1 fire 5"},   // 0x0A
   {"P1 Button 6",   BIT_DIGITAL,   Cps3But3 +  1,   "p1 fire 6"},   // 0x0B

   {"P2 Coin",      BIT_DIGITAL,   Cps3But2 +  9,   "p2 coin"},      // 0x0C
   {"P2 Start",   BIT_DIGITAL,   Cps3But2 + 13,   "p2 start"},   // 0x0D
   {"P2 Up",      BIT_DIGITAL,   Cps3But1 +  8,   "p2 up"},      // 0x0E
   {"P2 Down",      BIT_DIGITAL,   Cps3But1 +  9,   "p2 down"},      // 0x0F
   {"P2 Left",      BIT_DIGITAL,   Cps3But1 + 10,   "p2 left"},      // 0x10
   {"P2 Right",   BIT_DIGITAL,   Cps3But1 + 11,   "p2 right"},   // 0x11
   {"P2 Button 1",   BIT_DIGITAL,   Cps3But1 + 12,   "p2 fire 1"},   // 0x12
   {"P2 Button 2",   BIT_DIGITAL,   Cps3But1 + 13,   "p2 fire 2"},   // 0x13
   {"P2 Button 3",   BIT_DIGITAL,   Cps3But1 + 14,   "p2 fire 3"},   // 0x14
   {"P2 Button 4",   BIT_DIGITAL,   Cps3But3 +  4,   "p2 fire 4"},   // 0x15
   {"P2 Button 5",   BIT_DIGITAL,   Cps3But3 +  5,   "p2 fire 5"},   // 0x16
   {"P2 Button 6",   BIT_DIGITAL,   Cps3But2 + 10,   "p2 fire 6"},   // 0x17

   {"Service",      BIT_DIGITAL,   Cps3But2 +  0,   "service"},      // 0x18
   {"Diagnostic",   BIT_DIGITAL,   Cps3But2 +  1,   "diag"},      // 0x19

   {"Reset",      BIT_DIGITAL,   &cps3_reset,   "reset"},      // 0x1A
   {"Region",      BIT_DIPSWITCH,   &cps3_dip,      "dip"},         // 0x1B

ThanX for the help BisonSAS!.

SeeYaa!
 

[MasterPhW]

Wow, you are fast in releasing new stuff!
My problem with the blitter and the guru meditation is still there, btw.
Did you read my feature suggestion?
I'll quote myself:

You know, FBA has only a Buttons mapping for the game you a currently playing, but no global config, you can set.
It would be great to have a global button mapping and a per game button mapping, if a per game setting exists it's used instead of the global values, if it isn't the global  config is used.
Would be a great feature IMHO...
Btw: I've retested the nvidea bug with two newer driver version than the installed, but no luck... still getting the Problem... I wonder why, what's wrong.
Probably you can fix it!

[CaptainCPS]

Wow, you are fast in releasing new stuff!
My problem with the blitter and the guru meditation is still there, btw.
Did you read my feature suggestion?
I'll quote myself:

Check this recent thread posted by 'Glitch', I helped him with some issues about the preset input configuration feature that FBA currently have, that btw, I plan to verify since is not that user-friendly...

http://neo-source.com/index.php?topic=807.0

SeeYaa!
 

[pmc2]

Hello everyone,

Thanks CaptainCPS-x for this great FBA build, but...


Knowing that I have the full set of MAME roms (.122u3), I would like to know why in this picture I have a red icon on the set NeoGeo:


click for enlarge


In the CPS3 set I have "Red earth (no cd)" game red (and not you) although MAME doesn't propose this game actually.

Code: [Select]

// We don't have any actual warzard / red earth no cd bios sets, but keep this here anyway
GAME( 1996, redeartn,redearth, cps3, cps3, warzard,ROT0,   "Capcom", "Red Earth (961121, NO CD)", GAME_NOT_WORKING )

[..]

redearth_nocd.bios NOT FOUND (NO GOOD DUMP KNOWN)


click for enlarge


I cannot launch any CPS3 game, I came across the following message:


click for enlarge


Finally, there are two CPS1 sets not upgraded (not .122 series), there are "Three Wonders (World 910520) and "Final Fight (US)"


click for enlarge

Thanks for all.

ps: Sorry for my poor english.

[CaptainCPS]

Hello everyone,

Thanks CaptainCPS-x for this great FBA build, but...


Knowing that I have the full set of MAME roms (.122u3), I would like to know why in this picture I have a red icon on the set NeoGeo:


click for enlarge

In the Game Selection dialog go to the options Tab and make sure you have selected 'Show Available only' :





if you don't have that selected it will show light red icons that indicates that you have the roms, if the icons are dark red it indicates that you don't have the roms for those games.

In the CPS3 set I have "Red earth (no cd)" game red (and not you) although MAME doesn't propose this game actually.

Code: [Select]

// We don't have any actual warzard / red earth no cd bios sets, but keep this here anyway
GAME( 1996, redeartn,redearth, cps3, cps3, warzard,ROT0,   "Capcom", "Red Earth (961121, NO CD)", GAME_NOT_WORKING )

[..]

redearth_nocd.bios NOT FOUND (NO GOOD DUMP KNOWN)


click for enlarge

MAME actually doesn't propose it because they haven't dumped the 'Asia NCD' BIOS, is you look at the following post you will see how to get it and update your set:

http://neo-source.com/index.php?topic=786.msg6475#msg6475

-RedeartN.zip

I cannot launch any CPS3 game, I came across the following message:


click for enlarge

You must have this configured (FastBoot - Will patch the system for NCD games / SpeedHacks - Will make the CPS3 system go at full speed (~60fps)):

Finally, there are two CPS1 sets not upgraded (not .122 series), there are "Three Wonders (World 910520) and "Final Fight (US)"


click for enlarge

Thanks for all.

ps: Sorry for my poor english.

I will update the sets as soon as I can to be like MAME 122uX.

ThanX and this post remembered me that I have to make a F.A.Q. soon for FB Alpha Enhanced 

SeeYaa!
 

[pmc2]

OK except for the cps-3 (with speed hack & fast boot) : "CD-rom...connected.."

I don't understand  :idiot:


Thanks Captain 

[CaptainCPS]

OK except for the cps-3 (with speed hack & fast boot) : "CD-rom...connected.."

I don't understand  :idiot:


Thanks Captain 

CHD / CDROM games are not gonna run more than that because CD-ROM is not emulated for now, afaik OopsWare is working on that =), try the (NOCD) sets 

SeeYaa!
 

[CaptainCPS]

I had a time to import the 'Menu UI Theme Select' feature from FB Alpha Extras ^^ (check the attachment)

SeeYaa!
 

[CaptainCPS]

R14 UI WIP-> Now it's not obligatory to use the Menus UI Themes, I added a option to disable the Themes completely and use the OS default UI ^^
R14 UI WIP-> Modified 'FastBoot' & 'SpeedHacks' notifications, now they will only appear if you're currently running a game and only if the game is a CPS-III game.

SeeYaa!
 

[JacKc]

Do you sleep sometimes Cap' ...Thanks for the awesome FBA Build called FB Alpha Enhanced

[iq_132]

Hello everyone,

Thanks CaptainCPS-x for this great FBA build, but...


Knowing that I have the full set of MAME roms (.122u3), I would like to know why in this picture I have a red icon on the set NeoGeo:

You're probably missing some files from your NeoGeo.zip The FBA set includes the unibios & aes bios.

[pmc2]

You're probably missing some files from your NeoGeo.zip The FBA set includes the unibios & aes bios.

IQ: I added Unibios 2.3 (and removed 2.2) and it's ok now, thanks for info ^^


CaptainCPS-X: Do you know the 2xPM filter (present in Kega Fusion and MamePlus), It has better performance than HQ2X!!  Maybe..fba... ^^

[DF723]

I'm having a problem with R13. It seems that the emulator cannot remember my customized control setup after I exit a CPS3 game. I never have this issue with R12...........

[DF723]

.....also in R13, I noticed that when I do a "Super Art" in Street Fighter 3: New Generation, the "Super" background seems out of place/distorted. Here's the pic: